SB Chev 355 c.i.d Crate Engine, Dressed
390HP / 410 FT LBS, 10.0:1 Comp, Aluminium Heads

NOTE: Pictures of Crate Engines are for reference only, engine componenets & accessories are subject to change by manufacture without notice based on availability of parts at time of assembly.

DESCRIPTION:

• Dyno Tested Warranty
• HP & Torque: 390 HP / 410 FT LBS
• Compression Ratio: 10.0:1
• Aluminum Heads
• Hydraulic Roller Cam
• Cast Steel Crank
• Hypereutectic Pistons

BLOCK:

• Hand picked seasoned block
• Square and parallel decked
• Align honed main bearing bore
• Cylinders honed on computer controlled machine to within .0002 straightness and roundness
• Cylinders are sonic tested for thickness
• 4-Bolt Main
• 4.000" Bored .040" Over
• 1-Piece Rear Main Seal
• Mech fuel pump provision: Yes
• Passenger Side Dipstick
• Drilled and tapped for clutch linkage

ROTATING ASSEMBLY:

• Cast steel crankshaft
• 3.480" Stroke
• OEM type 5.700" connecting rods w/ 150,000 psi bolts
• Hypereutectic pistons
• Internal Front/ External Rear

CYLINDER HEADS:

• BluePrint Aluminum Cylinder Heads - H8002K
• 64cc chamber
• 2.02" intake/1.60" exhaust valves
• 195cc intake/75cc exhaust runners

CAM SPECS:

• Cam Type: Roller
• .495 Intake .503 Exhaust
• 220 Intake / 224 Exhaust duration
• @ .050 - 112 degree lobe separation

IGNITION TIMING:

• 34 Degrees Total at 3500 RPM

ALSO INCLUDES:

• New valve covers
• Oil pan
• Timing cover
• Aluminum intake
• HEI distributor
• 600 cfm carburetor
• Brass freeze plugs
• Dyno test results shipped with engine

NOTES:

• Not for use in pollution controlled vehicles.
• Recommended spark plugs are Champion 792 with .045" gap