LED Stop & Tail Light Conversion
Suit 1938-39 Ford Zephyr

Four Wire Connection. A four (4) wire connection with a dedicated turn signal wire is included. The onboard micro-controller
will determine weather to flash the turn signal or not based on the particular situation (i.e. Brake on or off). Use of the
fourth wire is optional depending on the customer's vehicle.

RapidFire Your tail lights are equipped with our new RapidFire stop light system. Every time the brakes are used our lights
will flash for three times in rapid succession followed by a constant on. This cycle is repeated every time the brakes are used.
This is valuable safety feature helps ensure the visibility to other drivers.

Pulse width modulated tail lamp. The reduced intensity tail light now is a rapid pulsing of the LEDs on and off (on for 10%
and off for 90% of the time). This pulsing repeats 2000 times per second. Since the LEDs are only on for 10% of the time, their
life is increased. The DOT defined minimum brightness ratio of 7:1 between to tail and stop light is exceeded to 10:1.

Built-In Reflector The moulded lens included a built-in reflector for visibility when the lights are off.

Stainless Steel All parts on your tail light are non-corrosive or stainless steel, including the hardware.